How to change hold recall timer NEC Level 2, Elite 48, 192, IPK

System Information Document

Date: 10/11/2007
To: All NEc Elite 48/192, IPK, Electra Level 2
From: Tech Services
RE: How to change Hold Recall Selection

This bulletin applies to all NEC Elite 48/192, IPK, Electra Level 2

From any phone with a display.

• Press Feature (FNC)
• Dial # 0 * 8 9 7 4 on the keypad.
• Press Line Key #1 (refer to attached document for location of line keys)
• Press Line Key #1 (refer to attached document for location of line keys)
• Dial 03 on keypad
• The screen should look similar to this example
  03 : HOLD RECL 25s
• The 2 digits before the s shown on the display will indicate the current hold recall time. 25 seconds is the default selection
• Using the line keys of your telephone selcet the new recall time
• Line key 1 = 25 seconds
• Line key 2 = 45 seconds
• Line key 3 = 60 seconds
• Line key 4 = 90 seconds
• Line key 5 = 120 seconds
• Line key 6 = 180 seconds
• Line key 7 = 240 seconds
• Line key 8 = No Limit assigned
• Press Transfer (TRF)
• Press Speaker to exit programming mode.