Easy Time Changes

Time Change for NEAX 1400-2000

Fall Back

This applies to the following switch types:

Manufacturer: NEC

Product Line: NEAX 1400

  • NEAX 2000
  • NEAX 2000 IVS2
  • NEAX 2000 IPS

Note: Programming needs to be done from a NEC Dterm phone with a display.

  1. Press TRANSFER or TRF (Depending on your type of phone)
  2. Press CONFERENCE or CNF (Depending on your type of phone)
  3. Press *
  4. Press TRANSFER or TRF (Depending on your type of phone)
  5. Press CONFERENCE or CNF (Depending on your type of phone)
  6. Press #
  7. Press REDIAL or LNR/SPD (Depending on your type of phone)
  8. Type 02
  9. Press RECALL
  10. Type 2
  11. Press RECALL
  12. Type in new time using format of HHMMSS hrs minutes seconds
  13. Press CONFERENCE or CNF (Depending on your type of phone)
  14. Pickup handset then replace in cradle

* Time should update on your display within 1 minute.*

Time Change for IPK II

Manufacturer: NEC

Product Line: IPK II

Note: The date must be set in system programming (10-01).

  1. Press the SPEAKER key
  2. Dial 728
  3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM)
  4. Dial two digits for the minutes (00~59)
  5. Press SPEAKER to hang up

* Time should update on your display within 1 minute.*

Time Change for Level 1 – IPK

This applies to the following switch types:

Manufacturer: NEC

Product Line:

  • Electra Level II & Advanced
  • Electra 120
  • Electra Elite 48 & 192
  • Electra Level I

Note: Programming needs to be done from a NEC Dterm phone with a display connected to ports 01 or 02.

  1. Press FEATURE or FNC (Depending on your type of phone)
  2. Press 9
  3. Press #
  4. Type the hour and minute on the dial pad
  5. Press RECALL to change the AM/PM setting
  6. Press FEATURE or FNC (Depending on your type of phone)

* Time should update on your display within 1 minute.*

If you need further assistance please call 800.296.1417

Time Change for Iwatsu

Manufacturer: Iwatsu

Product Line: Iwatsu Enterprise-CS

To adjust the clock settings on ECS systems running software releases prior to 2.10, perform the following steps from an attendant station:

  1. Press the Speaker button SPKR
  2. Wait for the dial tone
  3. Press the Feature button FEAT then dial 6 + 4
  4. Dial the time in military time H H : M M
  5. Wait for a confirmation tone
  6. Press the Speaker button SPKR

Iwatsu Voice Networks provided an update to the ECS system with the release of version 2.10 to accommodate the New Daylight Savings Time dates. All software versions 2.10 and higher provide for the new time change. Contact Total Technology Management with questions about which software version was installed in your system.

Product Line: ADIX-VS, ADIX-APS and ADIX Systems

From the Operator DSS when idle:

  • Press [ICM] + [FEAT] + [6] + [4]
  • Enter the time [HH MM] using the 24 hour military clock
  • Press [SPKR]

IMPORTANT NOTE: If your System changed to or from Daylight Savings time incorrectly please contact Total Technology Management to request the auto changeover setting be disabled. The Beginning and End dates where hard coded into the system and can only be disabled and not changed.

Product Line: Enterprise TOL and ADIX TOL Systems

Time changes in all Enterprise TOL and ADIX TOL systems are controlled by the Microsoft Windows operating system. Microsoft Windows provides for automated Daylight Savings Time changes based upon the time zone setting at installation. If Windows is set for automatic Daylight Savings Time change it will follow the old Daylight Savings Time schedule and therefore should be upgraded. If the upgrade is not performed the automatic Daylight Savings Time update should be disabled and performed manually. Information on software patches and upgrades for Microsoft operating systems are available at www.microsoft.com. Search under “Daylight Savings Time” and you will find links to information on each Windows version. Depending on the age of the TOL system it may have been shipped with either a Windows 2000 or Windows XP operating system.

Product Line: Omega-Voice VMI

The Omega-Voice VMI system (IX-4VML, VS-VML, IX-4SEVMC) does not provide an automatic Daylight Savings Time change feature. Therefore, all Omega-Voice VMI systems require the time to be manually changed via the System Editor. Contact Total Technology Management for assistance with changing your Omega Voice VMI time.

Product Line: ZT-D

From the operator only when idle:

  • Go off-hook and press [FEAT] + [SPKR] + [3]
  • Enter the time [HH MM] using the 24 hour military clock
  • Go on-hook

Product Line: ZT-S

From the Master KT only, when idle:

  • Go off-hook and press [FEAT] + [#] + [2]
  • Enter the time [HH MM] using the 24 hour military clock
  • Go on-hook

Product Line: IDS-128

From Console:

  • Press [PROG] then [3] then [SET]
  • Enter the time as HH + [SP] + MM + [SP] + [*AM] or [*PM]
  • Press [SET] then [PROG]

Product Line: EX-816/824/1648 - Versions 1 and 2

From the Station 20 when idle:

  • Go off-hook and press [FEAT] + [5]
  • Enter the time [HH MM] using the 24 hour military clock
  • Go on-hook

Product Line:

  • EX-816/824/1648 - Version 3
  • EX-1232/2464 - Versions 1 and 2

From the Station 20 when idle:

  • Go off-hook and press [FEAT] + [8] + [1]
  • Enter the time [HH MM] using the 24 hour military clock
  • Go on-hook

Product Line: TXX-616 and EX-616

From the Station 20 when idle and on-hook:

  • Press [0] + [3 digit password] + [program number 00]
  • Enter the time [HH MM] using the 24 hour military clock
  • Press [FWD] + [FLASH] + [FLASH]